GestiTec Core · Breakdowns and call-outs
Breakdown and call-out management for technical services
Every call-out comes in with its severity, has an owner and a status, and reaches the technician with the unit’s history.
Included in GestiTec Core, from €19.90 a month + VAT with 3 users. See prices
A breakdown, from start to finish
Every breakdown moves through statuses the whole office can see, so nobody has to call to find out how it’s going.
Pending
Just came in.Critical: out of service- Not a faultClosed with its reason.
To schedule
Needs a date.Scheduled
Technician and time set.In progress
The technician is on it.- On holdWith its reason, then back.Parts · Quote · Customer · Other
Resolved
Closed and in the history.
Critical means out of service
It comes in as minor, moderate or critical. A critical one takes the unit out of service until it’s resolved, and the technician gets the alert.
- Minor: fixed at the next service visit
- Moderate: someone has to go back sooner
- Once assigned, an alert on the technician’s phone

Where call-outs come in
The breakdown is logged where it’s spotted, without relying on someone remembering a phone call.
From the office
Whoever takes the call logs it with its severity.
From the checklist
The technician reports it mid-visit, from the item that fails.
And those not yet customers
A form with your link to request maintenance, a repair or a new lift.
Every breakdown is closed the right way
And it stays in the unit’s history, with what was done and who did it.
- the customer signs with a finger on the phone
- Signed
- with the reason it couldn’t be collected
- Unsigned
- the customer is told in writing what was done
- Remote
- closed with its reason
- Not a fault
Try it here: resolve a breakdown
With sample data. A call-out comes in: mark it critical, assign it, accept it on the technician’s phone and close it with the customer’s signature.
- Mark it critical
- Assign it
- Accept it
- Close it, signed
Breakdown resolved and signed. The lift is back in service and it's all in its history.
The office
Faults
Monday · 9 NovFaultCriticalResolved
CP Calle Cuba 27Lift
Stuck between two floors
The technician's phone
Fault resolved
The customer gets the report by email.
In serviceBreakdown resolved and signed. The lift is back in service and it's all in its history.
Questions about breakdowns and call-outs
See all questionsIt’s logged whatever the time and stays pending with its severity; if it’s critical, the unit is out of service in the system. Once it’s assigned, the technician gets the alert on their phone. Who covers out of hours is up to your company, as it is now.
Because it moves to “Resolved” and stays in the unit’s history with what was done, who did it and how it was closed: with the customer’s signature, without it and with the reason, or remotely. If it was critical, the unit is back in service.
They put it on hold and say what it’s waiting for: parts, a quote waiting to be accepted, the customer or another reason. The office sees it in the list without having to ask.
It’s closed as “Not a fault”, with the reason, and it’s recorded. Nothing is sent to the customer, because there’s been no repair.
Yes, those who aren’t customers yet: you have a form with your link to request maintenance, a repair or a new lift, and the office turns the request into a customer. Your customers’ breakdowns are logged by the office or the technician.
Not today. What you have is the status of every breakdown, who’s handling it and its history; the commitments to your customers are yours to set.
Shall we look at it with your call-outs?
We show you how a breakdown would come in, be assigned and be closed in your company, using a sample company. Included in GestiTec Core, from €19.90 a month + VAT with 3 users.
- No obligation
- You deal with the team that builds it
- Quick reply

GestiTec Admin
GestiTec Operaciones
GestiTec Personal
GestiTec Negocio